Pneumatic rotary bus door cylinder assembly for bus and coach manufacturer from China Circle Bus Door Systems Co.,Ltd

Pneumatic rotary bus door cylinder assembly for bus and coach

Place of Origin:

Jiangsu, China (Mainland)


	Add to My Favorites
HiSupplier Escrow	Share \|

Product Detail

Our company is the leading bus door system manufacturer in Asia, we can provide the optimum door system for any vehicles.

Introduction:

Application: tour bus and intercity bus.

Component: Rotary actuator

1) The actuator provides rotary motion and "Lift-to-latch" feature.

A double acting cylinder drives a splined shaft through a helical ball cage to provide rotary motion. When the door reaches the closed position, the actuator lifts the door shaft and door panel approximately 10mm,enabling latches on the door panel to engage mating wedges on the door jambs.The door panel is held closed as long as air pressure is applied the actuator.

Operating principle:

1)Auto operation :When "open" or "close" switch is pushed, the 5-way 2-position solenoid valve will be actuated, which drives linear pneumatic cylinder move up and down. Through splined shaft,the linear motion transfer to rotation, which cause the door open or close.

2)Emergency release: In case of emergency, rotate the emergency valve 90 degree to release the air pressure. The door panel will drop as soon as air pressure in the cylinder is low. Push the door panel manually to open the door

3)Sensitive edge: In case the passenger or other items are clamped during the vehicle door closing, the door panel will be lifted and actuate the limit switch to reverse the motion to open the door.

Main Parameter:

Maximum torque in locked position (@90 psi)	122 ft-lbs
Recommended door shaft rotation	90 degree
Operating temperature	-30°C to 80°C
Envelope size	5.51"w x 12.50"d x 4.53"h
Operating pressure	90-125 psi
Minimum Life cycle	500,000
Locking mechanism	Local wedge lock
Door closing time	3-5 seconds
Door opening time	3-5 seconds